DSL Access without a Pots Splitter | Paradyne Hotwire 5446 guide

DSL Access without a POTS Splitter

When the Hotwire 5446 RTU is installed without a POTS splitter, a second telephone wiring pair is needed for DSL access.

Central

Office

(CO)

Network

Service

Provider

(NSP)

Demarcation

Point

Local Loop

Punchdown Block or NID

Customer Premises (CP)

POTS		End-user
		Systems
DSL	RTU
DSL Jack	RTU
DSL Jack
Ethernet		Ethernet
Crossover or		Ethernet
Cable		Cable
Cable
		Hub or
		Router
		98-16104

DSL – Digital Subscriber Line	POTS – Plain Old Telephone Service
NID – Network Interface Device	RTU – Remote Termination Unit
New Wiring Connections			Existing Wiring (POTS)

4

Image 4

Paradyne Hotwire 5446 installation instructions DSL Access without a Pots Splitter

Contents

Before You Begin Wiring and Cables NeededDocument Number Document Title Package Checklist What Does the Hotwire 5446 RTU Do?DSL Access with a Hotwire 5030 or 5038 Pots Splitter Network Service Provider DSL Access with a Hotwire 5038 Distributed Pots SplitterCustomer Premises CP DSL Access without a Pots Splitter Procedure Installing the DSL Access WiringPunchdown Block Telephone Network Interface Device NID DSL/POTS RJ11 Wall Jack Hotwire RTU Installing the Hotwire 5446 RTUPots Splitter Ethernet Line Alarm red Power-OnDigital Subscriber Line green Ethernet Link green Optional RTU Wall Placement RTU Hardware Template Status LEDs Condition Status Troubleshooting LED Symptom Action Hotwire 5446 RTU Next Hop Router Support Network Service Provider Example Hotwire 5446 RTU IP SetupExample using TCP/IP Network Settings with Windows Increasing the Number of End-User Systems Cables & ConnectorsPin # Function Ethernet Cable Pin Straight-Through ConnectionPin Ethernet Crossover Cable Function Pin # Pin # Function Hotwire 5446 RTU Technical Specifications Specification Important Safety Instructions Declaration of Conformity Japan CE Marking Canada EMI Warnings Document Feedback Warranty, Sales, Service, and Training InformationTrademarks