Parrot DMP-BD80 Enjoying High Bit rate Audio and Video, About audio from audio output terminal

Enjoying High Bit rate Audio and Video

This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video.

Enjoying High Bit rate Audio with 7.1ch speaker and 5.1ch speaker

To enjoy above high bit rate audio, the following conditions are necessary. (Part shown in the shaded area of table given below)

NECESSARY CONNECTIONS ≥HDMI AV OUT terminal: ( 9)

≥7.1ch AUDIO OUT terminal [BD80]: ( 9)/ 5.1ch AUDIO OUT terminal [BD80]: ( 10)

NECESSARY SETTINGS

≥Set “BD-Video Secondary Audio” to “Off”. ( 30)

≥HDMI AV OUT terminal: Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “Bitstream” or “PCM”. ( 30)

≥7.1ch AUDIO OUT terminal [BD80]: Set “Analog Audio Output” to “7.1ch”. ( 31)

≥5.1ch AUDIO OUT terminal [BD80]: Set “Analog Audio Output” to “2ch (Downmix) + 5.1ch”. ( 31)

About audio from audio output terminal

Connect an amplifier/receiver ( 9, 10) and confirm the desired audio type and necessary settings (“BD-Video Secondary Audio”, “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD”).

≥The number of channels listed is the maximum possible number of output channels.

≥Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.

Terminal		HDMI AV OUT			DIGITAL AUDIO OUT		7.1ch AUDIO OUT [BD80]			5.1ch
										AUDIO OUT
										[BD80]
“Dolby D/Dolby D +/	“Bitstream”*1		“PCM”*3		“Bitstream”	“PCM”		—		—
Dolby TrueHD”/
“DTS/DTS-HD”
“BD-Video	“On”*2	“Off”	“On”	“Off”	“On”/“Off”	“On”/“Off”	“On”		“Off”	“On”/“Off”
Secondary Audio”
	Dolby Digital/	Dolby			Dolby Digital/
Dolby Digital/		Digital/
	Dolby Digital		5.1ch PCM		Dolby Digital			5.1ch
Dolby Digital EX*5		Dolby Digital
	EX*6	EX			EX*6
Dolby Digital Plus		Dolby Digital
	Dolby Digital	Plus	5.1ch	7.1ch PCM	Dolby Digital		5.1ch*2		7.1ch
			PCM*2
Dolby TrueHD		Dolby
		TrueHD
DTS Digital	DTS Digital	DTS Digital	[DVD-V]: 5.1ch PCM		DTS Digital		[DVD-V]: 5.1ch
Surround/	Surround/	Surround/			Surround/	Down-mixed
			[BD-V]: 7.1ch PCM*4				[BD-V]: 7.1ch*4
DTS-ES*5	DTS-ES*6	DTS-ES			DTS-ES*6					5.1ch
						2ch PCM
		DTS-HD
DTS-HD High		High
Resolution Audio	DTS Digital	Resolution			DTS Digital
		Audio	7.1ch PCM*4					7.1ch*4
	Surround				Surround
DTS-HD Master		DTS-HD
		Master
Audio
		Audio
	Down-mixed		Down-mixed		Down-mixed		Down-mixed
7.1ch LPCM		7.1ch PCM	5.1ch	7.1ch PCM					7.1ch
	5.1ch PCM				2ch PCM		5.1ch*	2
			PCM*2
*1 When the connected	equipment	is not supported	with these	audio format,	the audio is	output as Dolby	Digital bitstream, DTS Digital Surround
bitstream or down-mixed 2ch PCM (e.g., TV).
*2 [BD-V]: When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if “BD-Video Secondary
Audio” was set to “Off”.
*3 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
*4 [BD-V]:When the connected equipment is supported with 7.1 channel surround, the audio output is amplified from 5.1ch or 6.1ch to 7.1ch
depending on the DTS, Inc. specifications.
*5 With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio
decoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
*6 [BD-V]: When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital
Surround, however if playing BD-Video without secondary audio or clicking sound, the audio is output as the original format.
NECESSARY SETTINGS
≥HDMI AV OUT/DIGITAL AUDIO OUT terminal: “Digital Audio Output” ( 30)
≥[BD80] 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminal: “Digital Audio Output” and “Analog Audio Output” ( 30, 31)
[Note]
≥When setting “BD-Video Secondary Audio” to “Off”, the clicking sound on the menu and audio with secondary video in picture-in-picture mode
( 19) cannot be output.

Regarding 24p output

	Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
	60 frames/second in accordance with the display format.
	These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
	NECESSARY CONNECTIONS
	≥Connect to a TV supporting 1080/24p input via an HDMI cable.
RQT9401	NECESSARY SETTINGS
	≥“24p Output”: “On” ( 31)

20