Displays | Page |
The display is dim.
The elapsed time displayed is actually less than the play time.
≥Change “FL Display” in the Setup menu.
≥The displayed play time is converted from the number of frames at 29.97 frames (equal to 0.999 seconds) to one second. There will be a slight difference between the time displayed and the actual elapsed time (e.g., actual
30
—
TV screen and video
The images from this unit do | ≥Make sure that the television is connected to the VIDEO OUT terminal, COMPONENT | 8, 9 |
not appear on the television. | VIDEO OUT terminals or HDMI AV OUT terminal on this unit. | — |
| ≥Make sure that the television’s input setting (e.g., AV 1) is correct. | |
Picture is distorted. | ≥An incorrect resolution is selected in “Component Resolution”, when the television is connected to | 31 |
| COMPONENT VIDEO OUT terminals. While stopped, press and hold [∫] and [1] (PLAY) on the |
|
| main unit at the same time for more than 5 seconds to cancel this setting. Set the item again. | 31 |
| ≥If “24p Output” is set to “On” when the unit is connected to a TV through any terminal other | |
| than HDMI, images may not display properly. In this case, set “24p Output” to “Off”. | — |
| ≥The unit and television are using different video systems. While stopped, keep pressing [∫] | |
| and [< OPEN/CLOSE] on the main unit for 5 or more seconds. The system switches from |
|
| PAL to NTSC or vice versa. |
|
| ≥The system used on the disc doesn’t match your television. | — |
| – PAL discs cannot be correctly viewed on an NTSC television. | |
| – This unit can convert NTSC signals to PAL60 for viewing on a PAL television (“NTSC | 29 |
| Contents Output” in the “Picture”). | — |
| ≥[DivX] Images may not be output due to how files were created. | |
|
|
|
Played back image is distorted | ≥High definition video (transfer rate of 18 Mbps or faster) cannot be played back correctly if it | — |
or does not playback correctly. | was recorded on a DVD compatible to double speed or slower. |
|
([AVCHD]) |
|
|
|
|
|
Picture stops. | ≥[DivX] Picture may stop if the DivX files are greater than 2 GB. | — |
The screen changes | ≥When the “Screen Saver Function” in the Setup menu is set to “On”, the display may return to | 30 |
automatically. | the screen saver mode automatically if there is no operation for 10 minutes or more. |
|
|
|
|
. | ≥An image is not output from the COMPONENT VIDEO OUT terminal or the VIDEO OUT | 27 |
Video is not output | terminal when the “High Clarity Sound” is enabled. Set the “High Clarity Sound” in the |
|
|
| |
| terminal. |
|
Video is not output in high | ≥High definition video cannot be output through the VIDEO OUT terminal. | — |
definition. | ≥Confirm that the “HDMI Video Mode”, “HDMI Video Format”, and “Component Resolution” in | 31 |
| the Setup menu are set properly. | — |
| ≥The video output resolution is restricted to “576p/480p” when | |
|
| |
| VIDEO OUT terminals. |
|
|
|
|
Status messages do not appear. | ≥Select “Automatic” in | 30 |
The 4:3 aspect ratio picture | ≥Use the television to change the aspect. Refer to your television’s operating instructions. | — |
expands left and right. | ≥When using a component video cable, set “Progressive” to “Video”. If the situation is not | 27, 31 |
Screen size is wrong. | restored after that, set “TV Aspect” to “4:3 Pan & Scan”. |
|
|
| |
|
|
|
There is a lot of | ≥Turn “3D NR” or “Integrated NR” off if it is on. | 27 |
when playing video. |
|
|
There is no apparent change in | ≥The effect is less perceivable with some types of video. | — |
picture quality when adjusted |
|
|
with the “Picture” menu in the |
|
|
|
|
|
The | ≥If the “Screen Saver Function” in the Setup menu is set to “Off”, the | 30 |
in gray. | displayed in black. |
|
Still pictures (JPEG) do not | ≥The images that were edited on the PC, such as Progressive JPEG, etc., may not playback. | 34 |
playback normally. |
|
|
Reference
RQT9401
39
