6

12

3

1. Gear Shift Lever

2.Neutral Lock Gate

3.Adjustment Bolt

1. Steuerknüppel

2.Verschlussperre in Leerlaufstellung

3.Einstellbolzen

1. Levier de changement de vitesse

2.Encoche de position neutre (point mort)

3.Vis de réglage

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT

The transaxle should be in neutral when the gear shift lever is in neutral (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

•Make sure transaxle is in neutral .

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

•Loosen adjustment bolt in front of the right rear wheel.

•Position the gear shift lever in the neutral position.

•Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

EINSTELLUNG DES SCHALTHEBELS DES DIFFERENTIALGETRIEBES

Das Differentialgetriebe muß sich in Leerlaufstellung befinden, wenn der Schalthebel in der Neutral-Stellung (Verschlußsperre) steht. Diese Einstellung wird bereits vom Hersteller im Werk durchgeführt. Sollte es jedoch dennoch erforderlich sein, weitere Einstellungen vorzunehmen, so muß folgendermaßen vorgegangen werden:

•Zunächst muß sichergestellt werden, daß sich das Differentialgetriebe in Leerlaufstellung befindet.

HINWEIS: Wenn die Hinterräder des Traktors frei beweglich sind, ist das Getriebe immer in Leerlaufstellung.

•Den vorne auf dem rechten Hinterrad befindlichen Einstellbolzen lockern.

•Nun den Schalthebel in die Leerlaufstellung bringen.

•Den Einstellbolzen wieder fest anziehen.

HINWEIS: Falls eine größere Bewegungsfreiheit benötigt wird, um an den Einstellbolzen zu gelangen, ist es ratsam, die Mäherplattform in die niedrigste Stellung abzusenken.

REGLAGE DE LA POSITION NEUTRE (POINT MORT) DU LEVIER DE CHANGEMENT DE VITESSE DES BOITES MECANIQUES.

La boîte de vitesse mécanique doit se trouver au point mort lorsque le levier de changement de vitesse se trouve dans l'encoche de position neutre . Le réglage de la position du levier est effectué en usine ; toutefois, un nouveau réglage peut s'avérer nécessaire, procéder alors de la façon suivante:

•Vérifier que la boîte de vitesse est au point mort.

REMARQUE : La boîte de vitesse est au point mort lorsque les roues arrières du tracteur peuvent être manoeuvrées librement.

•Desserrer la vis de réglage (3) située à l'avant de la roue arrière droite.

•Positionner le levier de changement de vitesse dans l'encoche de position neutre .

•Resserrer à fond la vis de réglage (3).

REMARQUE : Mettre le carter de coupe en position basse afin de dégager un peu plus d'espace pour effectuer ce réglage.

60

Page 59 Page 61
Page 60
Image 60
Partner Tech P11597 Transaxle Gear Shift Lever Neutral Adjustment, Einstellung DES Schalthebels DES Differentialgetriebes
Page 59 Page 61

P11597 specifications

The Partner Tech P11597 is an advanced point-of-sale (POS) terminal designed to streamline retail operations and enhance the customer experience. With its robust features and modern technologies, it serves as a powerful tool for businesses in various sectors, including retail, hospitality, and service industries.

One of the standout features of the P11597 is its high-performance processing capabilities, powered by an efficient processor that ensures fast transaction processing. This speed is crucial in busy environments where customer satisfaction is paramount. The terminal is equipped with a responsive touchscreen interface, facilitating intuitive navigation for both staff and customers. The display boasts high resolution and vivid colors, allowing for clear visibility in various lighting conditions.

The P11597 supports multiple payment options, including contactless, chip-and-PIN, and traditional magnetic stripe cards. This versatility not only accommodates a wide range of customer preferences but also improves transaction security, reducing the risk of fraud. Moreover, the device is equipped with advanced encryption and security features to safeguard sensitive customer data.

In terms of connectivity, the Partner Tech P11597 includes a variety of ports, such as USB, Ethernet, and serial connections, enabling seamless integration with existing systems and peripherals like barcode scanners, printers, and cash drawers. This flexibility allows businesses to expand their capabilities as needed.

Another key characteristic is its durability. The terminal is designed to withstand the rigors of daily use in a bustling retail environment. With a spill and dust-resistant design, it can endure accidental spills and maintain cleanliness, ensuring longevity and reliability.

Additionally, the P11597 is built with energy efficiency in mind. Its power-saving technologies contribute to reduced operational costs, making it an environmentally friendly choice for businesses.

Overall, the Partner Tech P11597 combines cutting-edge technology with user-friendly features, making it an ideal solution for businesses looking to enhance their POS capabilities. Its speed, security, and durability underline its reputation as a reliable choice for modern retail operations, catering effectively to the needs of both operators and customers alike.
Top Page Image Contents