Patton electronic 12168 user manual Configuration, Configuring the Hardware DIP Switches

4.0 CONFIGURATION

The Model 1068 has four DIP switches for configuring the unit for a wide variety of applications. This section describes switch locations and explains the different configurations.

4.1 CONFIGURING THE HARDWARE DIP SWITCHES

Using a small flat-tip screwdriver, remove the protective cover located on the underside of the Model 1068 (see Figure 10).

Power

Link

	QOL
Link	VLINK

Activity

Ethernet

VLINK

Modem

Figure 10. Removing protective cover

Figure 11 and Figure 12 on page 16 show the orientation of the DIP switches in the On and Off positions.

15