Patton electronic 2073RC user manual Configuring the Rear Interface Card

3.2 CONFIGURING THE REAR INTERFACE CARD

Your Model 2073RC comes with one of the following rear cards:

•The Model 1001RCM13448C (M/34/ RJ-48C)

•The Model 1001RCM11548C (DB-15/RJ-48C)

•The Model IM2RC/IA (RJ-45/10Base-T RJ-48C)

Each of these options supports one DTE interface connection and one 4- wire line connection. Figure 3 illustrates the interface options for the Model 2073RC Series.

Note The 2073RC Series function card is paired with a specially designed rear card and must not be swapped with other Patton

rear cards.
Model	Model	Model
1001RCM11548C	1001RCM13448C	IM2RC/IA
RJ-48C	RJ-48C	RJ-48C
DB-15 F	M/34 F

Figure 3. Model 2073RC Series interface card options

Prior to installation, you will need to examine the rear card and make sure it is properly configured for your application.

Each rear card is configured by setting straps located on the PC board. To configure the rear cards, you must set the configuration straps.

Figure 4 shows the orientation of these straps. Each strap can either be on pegs 1 and 2,or on pegs 2 and 3.

10