Patton electronic 3088 Series user manual About this guide, Audience, Structure

About this guide

This guide describes installing and operating the Patton Electronics Model 3088 G.SHDSL RocketLink-G™ NTU.

Audience

This guide is intended for the following users:

•Operators

•Installers

•Maintenance technicians

Structure

This guide contains the following chapters and appendices:

•Chapter 1 on page 14 provides information about NTU features and capabilities

•Chapter 2 on page 18 contains an overview describing NTU operation and applications

•Chapter 3 on page 41 provides hardware installation procedures

•Chapter 4 on page 51 provides quick-start procedures for configuring the RocketLink-G NTU

•Chapter 5 on page 55 describes how to install and operate the RocketLink-G NTU

•Chapter 6 on page 60 describes how to configure the RocketLink-G NTU, save the configuration, reset the NTU to the factory default condition, and upgrade the system software

•Chapter 7 on page 62 describes the system tools that can be used to diagnose problems with the NTU

•Chapter 8 on page 64 contains information on contacting Patton technical support for assistance

•Appendix A on page 67 contains compliance information for the RocketLink-G NTU

•Appendix B on page 71 contains specifications for the NTU

•Appendix D on page 78 provides cable recommendations

•Appendix E on page 80 describes the NTU’s ports and pin-outs

For best results, read the contents of this guide before you install the NTU.

10