Patton electronic SL4050/10 manual DNS Server IP, Sntp Server IP, Do Not Disturb, Call forwarding

SmartLink 4050 Series Getting Started Guide 2 • Installing the SmartLink SIP Phone

5.Press . Use the numeric keypad to enter the router IP address

DNS Server IP

The domain name system (DNS) is the way that Internet domain names are located and translated into Inter- net Protocol addresses. There is probably a DNS server within close geographic proximity to your ISP that maps the domain names in your Internet requests or forwards them to other servers in the Internet.

1.Press .

2.Use the numeric keypad to enter the DNS server IP address

SNTP Server IP

Simple Network Time Protocol (SNTP) is a protocol used to help match your system clock with an accurate time source. If you do not know your SNTP Server IP, please ignore this section. SNTP Server IP address can be URL or IP address format.

1.Press .

2.Use the numeric keypad to enter the SNTP server IP or URL address

Do Not Disturb

This setting allows the user to reject all incoming phone calls.

1.Press .

2. Use or to select ENABLE or DISABLE

Call forwarding

CF (call forward) Unconditional

Enable CF Unconditional to forward all the incoming calls to another number. Otherwise set to disable.

Note You will need to use a web-browser to input the forwarded phone number. Refer to chapter 3, “Using the configuration menu” on page 32 for more information on call forwarding.

1.Press .

2. Use or to select ENABLE or DISABLE

Setting up the VoIP SIP phone 28