Paxar Monarch 9825 C o n n e c t i n g t h e C a b l e s, U s i n g t h e C o n t r o l P a n e l

This Quick Reference contains supply loading and general care and maintenance procedures. For more detailed information, the Operator’s Handbook is on the enclosed CD-ROM or can be downloaded from our Web site (www.monarch.com). You can print this manual or order a hard-copy version (part number TC9825OH).

C o n n e c t i n g t h e C a b l e s

The power supply automatically switches between 115V or 230V. There are no operator settings required.

1.Plug the power cable into the socket. Plug the other end of the cable into a grounded electrical outlet.

2.Connect the communication cable into the appropriate port. Secure the cable with the connecting screws (serial) or spring clips (parallel).

If you are communicating with the host through the serial port, make sure the printer's communication values match those at the host. The factory default values are 9600 Baud, 8 bit data frame, 1 stop bit, no parity, and DTR flow control. Set the communication values on the printer to match those at the host.

3.Turn on the printer. Press ( I ) to turn on and ( O ) to turn off the printer.

U s i n g t h e C o n t r o l P a n e l

The control panel has a two-line LCD display, 2 status lights, and five buttons. The control panel displays error codes/messages, and allows you to setup/configure the printer.

Power: The printer shows a steady green light when it is on.

Fault:The printer shows a steady amber light when it is out of labels or ribbon, or when you have a supply jam.

2