Paxar Monarch Pathfinder Ultra Gold manual O u t L i n e F i e l d s, Defining Line Fields 8

D E F I N I N G L I N E F I E L D S 8

Use lines to form borders or mark out original prices. Define each line separately.

NOTE: This field is not assigned a field number, but is counted as a field (keep this in mind, as the printer allows a maximum of 50 fields per format).

You can define any line length and a thickness up to 10 dots, as long as the solid black print does not exceed 30% of any given square inch of the label. Data edits do not apply to line fields.

NOTE: All samples shown in this chapter are created using 2.0-inch long by 2.0-inch wide supplies.

A b o u t L i n e F i e l d s

Read the following information to become familiar with the prompts for line fields. Valid ranges for the prompts are listed as well as information about using line fields.

Format Name	Depending on your printer’s configuration, enter a name for
	the format. For more information about your printer’s
	configuration, see Chapter 3, “Configuring the Printer.” The
	maximum number of characters for the format name is 16.
Format Number	Reserved for future use. (Depending on your printer’s
	configuration, enter a number for the format. The format
	number range is 1 – 99.)
Format	Reserved for future use. (Depending on your printer’s
Description	configuration, enter a description for the format.)
Supply Length	The length of your loaded supply. Measure from the top of
	one black mark to the top of the next black mark. The
	standard supply lengths are: 55, 79, 110, 150, 200, 300, or
	400 inches.
Supply Width	The width of your loaded supply. Choices include 1.20, 1.50,
	or 2.00 inches.
Field Type	Choices include text, bar code, constant text, and line.
	Defining Line Fields 8-1