ENGLISH
PR™ 10P
Thank you for purchasing the powered version of the Pro-Lite Series PR™10. The PR 10P features a bi-amped power section that provides 200 Watts peak dynamic power for the woofer and 70 Watts peak dynamic power for the compression driver tweeter, both with Peavey-exclusive DDT™ compression. Offering a 10" heavy duty woofer and the RX™14 compression driver, the PR 10P provides an XLR and 1/4"phone combo jack, with mic/line switchable level, balanced input with volume control and a pair of 1/4" phone jack inputs with concentric volume controls. Up to three line-level input signals can be mixed together, or one mic-level, and two line level signals mixed.
It is very important that you ensure the PR 10P has the proper AC line voltage supplied. You can find the proper voltage for your PR 10P printed next to the IEC line (power) cord on the rear panel of the unit. Please read this guide carefully to ensure your personal safety as well as the safety of your equipment.
Features
·Bi-amplified powered system with 270 W total peak dynamic power !
·Both power amps have DDT compression
·10" heavy duty woofer with 2" voice coil and 50 oz. magnet
·RX 14 1.4" titanium compression driver
·Peak SPL up to 119 dB with music!
·Combo jack with 1/4" TRS and Female XLR mic- or line-level balanced input
·Two 1/4" phone jack inputs with concentric level controls
·Input mixing built-in
·Molded-in horn with exceptionally smooth response and pattern control
·Top handgrip molded in
·Pole mount molded-in
·Top and bottom flying point inserts
Description
The Peavey PR 10P is a powered, bi-amplified, two-way speaker system engineered to provide the highest levels of performance in a compact, powered loudspeaker. Capable of up to 119 dB peak SPL, this tiny system can pump out a lot of sound. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form with a coated steel grille to offer an attractive-yet-durable powered speaker system.
This two-way powered system is comprised of a 200 W dynamic peak power amplifier driving a 10" heavy duty woofer. The RX™14 compression driver is driven by a 70 W peak dynamic power amplifier and features a 1.4" titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90˚ by 40˚) that is molded integrally into the enclosure.
A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4" phone jack inputs are controlled in level by a concentric pair of level controls. All three inputs can be mixed in any ratio.
The power amplifiers providing the bi-amplification are low-distortion units providing 150 W continuous RMS into the nominal 8 Ohm load of the woofer, and a 50 W continuous RMS into the nominal 8 Ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. Both amplifiers feature our patented DDT™ compression, which virtually eliminates audible power amplifier clipping.
A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamount™ allow maximum utility.
