Peavey GTX Input Module Connections Direct Out, Insert Send, Bal Insert Return, Group Ins Send

GTX CENTURY SERIES

REAR PANEL CONNECTIONS

Input Module Connections

Direct Out

This 1/4-inch balanced TRS jack delivers the direct output signal (post fader & post mute) from the associated input channel.

Insert Send

This 1/4-inch jack is used for sending a post-input preamp, post Hi Pass Filter, pre-EQ signal to an outboard processor. The signal at this jack is unbal- anced and always active regardless of the Insert Switch setting.

Bal Insert Return

This 1/4-inch balanced TRS jack receives it's sig- nal from an outboard processor. It can also be used to bring a signal into the channel, bypassing the input preamp and gain circuit. The return input is balanced and must be enabled by depressing the channel Insert switch.

DIR OUT

INSERT SEND

BAL INSERT RETURN

BAL LINE IN

BAL MIC IN

1

3

2

Group Module Connections

Group Out

This XLR connector carries the post-fader output signal from the associated group module.

Group Ins Send

This 1/4-inch TRS jack allows for the group sig- nal to be sent to an effect or signal processor.

Bal Ins Return

This 1/4-inch balanced TRS jack allows for the return of the effected and/or processed group sig- nal back into the associated group.

EFX Return

These two connectors allow for effect signals to be brought back into the board. The 1/4-inch bal- anced TRS jack accepts a balanced or unbalanced signal at -10 dB level and delivers the signal to the EFX return section. The female XLR connec- tor accepts a balanced signal at +4dB level and

GROUP OUT

GRP INS SEND

BAL INSERT RTN

EFX RETURN

-10 +4

1

3

2

BUS IN

1

3

2

Bal Line In	GTx
This 1/4-inch balanced TRS jack accepts an bal-	Input
	Module
anced or unbalanced line level input, and delivers it
into the associated input channel.

delivers the signal to the EFX return section of the group. Signals from both jacks are mixed together.

GTx

Group

Module

Mic In

This XLR connector accepts balanced microphone inputs for the associated input channel.

Bus In

This XLR connector accepts a balanced signal at +4dB level, and then sums it with all the other signals assigned to the asso- ciated groups.

Stereo Input Module

Connections

Insert L / Insert R

These ‘combined send & return’ TRS jacks are used to insert effects or signal processing into the Left and Right channels of the Stereo Input mod- ule.It can also be used to bring a signal into the channel, bypassing the input preamp and gain cir- cuit. The return input is enabled by depressing the channel Insert switch.

Bal Line In L / Bal Line In R

These 1/4-inch balanced TRS jacks accept bal- anced or unbalanced line level inputs, and delivers them into the associated (Left or Right) input chan- nels of the Stereo Input.

Bal Mic In L / Bal Mic in R

These XLR connectors accept balanced micro- phone inputs, and delivers them into the associated (Left or Right) input channels of the Stereo Input.

INSERT L

INSERT R

BAL LINE IN L

BAL LINE IN R

BAL MIC IN L

1

3

2

BAL MIC IN R

1

3

2

GTx

Stereo

Input

Module

MATRIX A OUT	MONO OUT	RIGHT OUT
INSERT A	MONO INSERT	RIGHT INSERT
MATRIX B OUT	MONITOR L OUT	AUX 3 OUT
INSERT B	MONITOR R OUT	AUX 4 OUT
EXT TB OUT	STR PGM IN	AUX 7 OUT
EXT TB IN	OSC/PINK IN	AUX 8 OUT
1
3
2
	GTx
	Master
	Modules

LEFT OUT

LEFT INSERT

AUX 1 OUT

AUX 2 OUT

AUX 5 OUT

AUX 6 OUT

PAGE 4