GTX | CENTURY SERIES |
GTx USER-OPTIONS
GTx consoles are shipped having standard configuration unless specified at time of order. These are ways that the console config- uration may be varied after manufacture. The items listed are internal options selected by gold jumper links.
Default is marked with a line on the board and is usually pins 1&2 of the three pin header.
In addition there are links for module function assignment. Take care to not disturb these when using USER OPTION links.
MODULE | LOCATION | OPTION TITLE | FUNCTION |
| M = Main board |
|
|
| C = Connector |
| (Shipped with the option underlined) |
All Inputs | M | Pre Source (SRC)Mute | Aux sends with or without Mute |
| M | Pre Source Select | Pre & Post EQ |
| M | Input Meter Source | Preamp, Prefader, Postfader |
Left/Right Out | M | J8, Aux local Mute | Fit links to enable Aux local mutes |
Mono Output | M | Matrix Post Mute? Y/N | Send Mono Post Mute Y/N |
Monitor Master | C | Talkback Phantom Power | On or Off |
Optional modules |
|
|
|
GTX Stereo In | C | Polarity Reverse |
| M | J2, L Pre source |
| M | J3, R Pre source |
| M | J4, Aux Pre Mute ? |
| M | Switch 1 Aux |
| M | Switch 2 Aux |
L only or L+R
Pre EQ or Prefader Pre EQ or Prefader Yes or No ?
source: Mono sum or Stereo source always Mono sum,
(overides user switch 'Aux Stereo', Aux 5 & 6 )
Matrix Module | M | Cue (PFL switch) | PFL or AFL |
IMPORTANT
Group, Left and Right modules are
These modules must always be installed in the correct positions. They are NOT interchangeable without being properly re-
assigned. Please contact the Crest Audio Service Department for more information.
APPENDIX A
