Olympus P-200 manual Do not damage the power cord, Do not disassemble or modify the printer

WARNING

Do not damage the power cord.

A damaged power cord may result in fire or electric shock.

To prevent the cord from being damaged,

DO NOT:

Jerk the cord to pull it out.

Bend the cord excessively.

Heat the cord.

Place heavy objects on the cord.

Rewire the cord.

If the power cord is damaged, contact your dealer.

Do not disassemble or modify the printer.

The printer has both hot and high voltage parts on the inside. To prevent an electric shock or printer malfunction, do not attempt to disassemble or modify the printer. For service or repair, contact your dealer.

Do not place liquids on the printer.

If liquid gets into the printer, it may result in fire or electric shock.

Do not place heavy objects on the printer.

Doing so may deform the printer cabinet, resulting in fire or electric shock. If the printer falls or is dropped, it may be damaged.

Do not install the printer in the following places.

To prevent fire, electric shock, and printer malfunction, do not install the printer in the following places.

Dusty, humid, or oily places

Should any dust or liquid get into the printer, it may result in fire or electric shock.

Extremely hot places

Do not expose the printer to direct sunlight (for example, inside a car and on the dashboard) or extremely high temperatures (near a heater, for example). Doing so may deform the printer cabinet, resulting in fire or electric shock.

Use the printer in an environment with an ambient temperature between 41 to 95°F (5 to 35°C) and humidity of 20 to 80%.

6