Olympus P-200 manual Even if this happens, remove the card. The error, Basic Printing

Cautions

•If CompactFlash cannot be inserted easily, do not force it in, but remove it, check the CompactFlash insertion orientation and retry insertion from the beginning.

•The image recorded in CompactFlash should be printed as it was recorded using an Olympus digital camera. Proper display and printing performances are not guaranteed for images that have been retouched and saved on a PC or that have been recorded with another brand of digital camera.

•Never attempt to insert or remove CompactFlash while the

ACCESS/CHARGE indicator on the operation panel is blinking. Doing so could destroy the CompactFlash formatting, making it unusable.

Notes

•Always use Type I (with a capacity of no more than 160 MB) or Type II (with a capacity of 340 MB) Compact Flash.

•SmartMedia cards always have priority, even when a CompactFlash card has already been inserted first. If you want to use data from the SmartMedia card, press the SmartMedia/ CompactFlash button to select it.

•Keep the card cover open while CompactFlash is inserted in the printer.

If an error is displayed (-E-) during insertion, retry insertion from the beginning. To remove CompactFlash, press the EJECT button. If the display

does not go out, refer to "Troubleshooting" on page 40. If the EJECT button is already pressed in the low

position, press it once to return it to the high position then press it again to eject. While the card is being ejected, the error display (-E-) may appear at times.

Even if this happens, remove the card. (The error

display may also appear if the card is not removed

after ejection, but this is not a malfunction.)

26 Basic Printing