4. Remaining battery power indication
The remaining battery power is indicated for 12 seconds after the printer is turned ON and during printing.
The remaining battery power indicator segments light
according to the following.
lights (turns off automatically): The battery is fully charged. You can print.
lights (turnsoffautomatically): The remaining battery power is sufficient. You can print.
lights (turns off automatically): The remaining battery power is too low. A few pages may be printed but battery power may run out before printing is complete.
lights: No remaining battery power. Turn the printer OFF and recharge the battery.
5. Removing the battery
Turn the printer OFF and make sure that the AC adapter is not connected.
Slide the battery unlock lever toward the paper feed cassette position (by about 2 mm), then remove the battery by sliding it in the opposite direction from when it was installed.
Install the rear cover in the same way as installing the battery. Store the removed battery with the provided cover installed to it.
Using print packs
Notes
•Always use the ink ribbon cartridge and print paper supplied together in the same carton.
•Do not print on used print paper.
You need the provided sample kit or an optional print pack (set of ink ribbon cartridge and print paper) for printing.
Purpose | Print Pack | Print Paper | Ink Ribbon |
(Printing) |
|
| Cartridge |
Standard | Standard | For25prints |
Setup 17
