Olympus P-200 manual Troubleshooting, For Your Information

For Your Information

Troubleshooting

Use the following measures to solve problems you may experience with your printer, and also read the Installa- tion Guide provided with the optional P-200 connec- tion kit. If the problem persists, contact you dealer.

Cannot turn the printer ON.

The AC adapter is not connected.

Connect the AC adapter properly. (Page 15)

Rechargeable battery is not installed.

Install the rechargeable battery. (Page 16)

The remaining battery power is low.

Fully recharge the rechargeable battery. (Page 16)

Cannot operate the printer with any of operation buttons.

When the ACCESS/CHARGE indicator blinks or PRINTING indicator lights, the printer is communicating with the PC.

The buttons on the printer are defeated during communication. Wait a few moments. (Pages 24-25)

When only the battery frame is displayed on it, the remaining battery power is low.

Recharge the rechargeable battery. (Page 16)

Cannot remove the ink ribbon cartridge.

The printer is OFF.

Turn the printer ON again and wait until the mechani- cal sound stops.

Printing takes a long time to start.

The printer takes a long time to print a TIFF file.

The printer takes about 3 minutes to print a 3-million- pixel TIFF image file. (Actual time varies depending on the image size.) Wait until the file printing completes.

Trimming reserved by DPOF takes a long time.

Trimming takes about 2 minutes. Wait until the file printing completes.

Cannot print.

The ink ribbon cartridge is not installed.

Install an ink ribbon cartridge. (Page 18)

The paper feed cassette is not installed.

Install the paper feed cassette. (Page 21)

Print paper is jammed at the paper exit.

Remove jammed paper and retry printing. (Page 21)

The printer cannot recognize the image format.

Printing from the card is not possible.

Indicator(s) light(s) or blink(s).

See pages 41-42.

40 For Your Information