System Requirements | Olympus P-200 guide

System Requirements

The following hardware and software are required to install and run this soft- ware.

Computer: IBM PC/AT compatible machine with an i486SX or better CPU running Windows 95, 98 or Me (Pentium or better CPU recommended). Memory: 8 MB minimum (32 MB or more recommended, depending on the

application to be printed).

Hard disk: Minimum 15 MB free (Recommendation: 30 MB or more). More space is required for larger images or multiple-page files

Display: Minimum 256-color graphics capability (Recommendation: 32,000

colors or more).

Disk drive: Floppy disk drive (required for installation).

Notes

This software may be upgraded without notice.

The screen images shown in this booklet may differ slightly from the actual screen

images displayed by the software.

The latest information about this software is recorded in the "Readme.txt" file on the provided floppy disk. Be sure to read this file.

5

Image 4

Olympus P-200 manual System Requirements

Contents

200 User Registration Table of Contents System Requirements Connect the printer to your PC Installing the SoftwareTurn on the printer and the PC. Launch Windows Insert the floppy disk into the PCs floppy drive Double-click the AddPrinter icon Select Local printer as the printer connection destination Click End to complete installation Uninstallation File menu, click Delete Printing Run the application and open the images you want to print Set the number of prints Copies Click Print When the print monitor is displayed To cancel printingClick the name of the queued document you want to cancel Tips for printing File menu of the application, click Print Split PrintClick Properties Single Adjusting the Image Quality Set the image quality in the Color adjustment sheet Troubleshooting Guide Jammed, etc Before printing Olympus America INC 200 Owners Record Table of Contents Introduction PrecautionsDuplication restrictions Safety precautions If the power cord is damaged, unplug it Do not damage the power cord Do not install the printer in the following placesDo not disassemble or modify the printer Do not place liquids on the printer Connect the power cord correctly Do not hold the power cord plug with wet handsDo not overload the power outlet Do not use the printer in the following placesPage Do not block the vent Do not move the printer when the power cord is tautDo not pull the cord with a jerk Beware of moisture condensation Operate the printer at least once every six monthsCarry the printer with both hands Transport the printer carefully Unpacking the printer Getting Started What you can do with the P-200 Digital color printer Making a variety of printsPrinting of images from a PC High-quality overcoated prints Identifying the parts Operation Panel Paper Feed Cassette Setup Setting up the printerTo supply power from the provided AC adapter Recharging the battery Battery power operation Remaining battery power indication Using print packsRemoving the battery Loading the ink ribbon cartridge If the cartridge compartment lid does not close Remove the ink ribbon cartridge, and then re-insert it To replace an ink ribbon cartridge Handling the ink ribbon cartridgeTo load a half-used ink ribbon cartridge Loading print paper Loading print paper in the paper feed Cassette Installing the paper feed cassette Onto the printer Storage precautions Basic Printing PreparationPrint all-frame print DPOFprint index print Opening the card cover Inserting the card into the printers slot Basic Printing Never attempt to insert or remove CompactFlash while To change the frame number display to file name Display PrintingDigital cameras with a file name display function Frame Basic Printing To cancel printing Making split prints of the same image Making split printsOther Printing Functions Indexprint Frame No. designation AII-frame display All-frame printing Printing DPOF-reserved images Appears on the control panel Printing the date SmartMedia or CompactFlash card. Date printing Before you begin Adjusting the sharpness Troubleshooting For Your Information If indicators light or blink If print paper is jammed Paper is jammed Remove jammed paper. See below For Your Information About the ink ribbon cartridge and print paper Storage after printing Specifications Printer FCC notice Protection against such interference in a residential Accessories as of October Print index Are not indicated in each case in this manual 1100 6MJ