Olympus P-200 manual If indicators light or blink, Noise interferes with printed images

The control panel displays 000 when the card is inserted.

There is no recognizable image data on the card. Check your camera's manual to confirm that its recording format is compatible with the printer (DCF/ EXIF).

The error display (-E-) appears when the card is inserted.

The card is not inserted correctly.

Remove the card and insert it again. There is a problem with the card.

Check the card and its contents. (Pages 24-26)

Noise interferes with printed images.

The data being printed is not data recorded by a digital camera.

Use a PC to print out image data that has not been recorded by a digital camera.

The data being printed has been processed by retouching software, etc.

The printer may be unable to print image data which has not been recorded by a digital camera.

Printing intervals are longer.

Printing intervals are automatically extended during continuous printing to prevent the internal components from overheating. (At this time, the PRINTING indicator blinks.)

This is not a malfunction. Wait a few minutes.

If indicators light or blink

If you cannot print, check the indicators on the opera- tion panel of the printer.

The PAPER/RIBBON alarm indicator blinks slowly (at intervals of about 0.5 sec.).

No ink ribbon cartridge is installed in the printer.

Install an ink ribbon cartridge to the printer. (Page 18) The print ribbon in the ink ribbon cartridge has run out. Replace the ink ribbon cartridge with a new one. (Page

20)

The PAPER/ RIBBON alarm indicator blinks fast (at intervals of about 0.25 sec.).

The paper feed cassette is not installed.

Install the paper feed cassette. (Page 22)

No print paper is loaded in the paper feed cassette. Remove the paper feed cassette, place print paper in it and install it to the printer. (Pages 21-22)

For Your Information 41