Olympus P-200 manual Loading print paper in the paper feed cassette

Loading print paper

Cautions

•Be careful not to stain or damage the paper feed guide.

•Do not touch the print surface (the glossy surface with nothing printed on it) when handling print paper.

•Do not leave print paper in a place subject to excessive dust. Clear prints cannot be obtained if dust or fingerprints are installed on the print surface.

•To prevent malfunction, use the dedicated print paper only.

•The maximum number of print paper sheets that can be placed in the paper feed cassette is 25. Be careful not to exceed this number when adding print paper. If too many print paper sheets are loaded, the printer may jam.

•To prevent paper jam, do not fold or bend print paper.

•Do not write on print paper before printing images on it. If you want to write something, be sure to write it after printing, using an oil- based ink. It is not possible to print word processor or typewriter characters on print paper.

Loading print paper in the paper feed

cassette

1Open the top case of the paper feed cassette by holding the finger hooks on both sides of the cassette.

2 Hold the bundle of print paper sheets so that the

protective sheet is on top, then insert the bundle

into the paper feed cassette pocket. After inserting

the print paper, remove the protective sheet. Each bundle of sheets can consist of up to 25 sheets of print paper.

3 Close the top case. Close the top case of the paper feed cassette. Be careful not to catch print paper between the case and the front or side panel.

Setup 21