Master Module Connections Matrix Out A&B, Mono Out

CENTURY SERIES

Master Module Connections

Matrix Out (A&B)

These two XLR connectors deliver a balanced signal from the associated matrix sends.

Mono Out

This XLR connector delivers a balanced post-fader signal con- taining all signals assigned to the Mono clean bus.

Right Out

GTX

Stereo Program In

This 1/4-inch jack accepts an unbalanced stereo line level sig- nal. Polarity is as follows: Tip=Left, Ring=R, Sleeve=Common.

Oscillator / Pink Noise In

This 1/4-inch TRS connector accepts a balanced or unbalanced signal from an oscillator or pink noise generator. This signal is assignable via the talkback assignment switches. Plugging into this jack disables the internal 1kHz oscillator.

This XLR connector delivers a balanced post-fader signal con- taining all signals assigned to the right output.

Left Out

This XLR connector delivers a balanced post-fader signal con- taining all signals assigned to the left output.

Matrix Insert (A&B)

This ‘combined send & return’ TRS jack allows for the inser- tion of an effect or signal processor into the audio path of the associated matrix.

Mono Insert

This ‘combined send & return’ TRS jack allows for the inser- tion of a signal processor into the path of the mono sub-mix.

Right Insert

This ‘combined send & return’ TRS jack allows for the inser- tion of an effect or signal processor into the audio path of the right sub-mix.

Left Insert

This ‘combined send & return’ TRS jack allows for the inser- tion of an effect or signal processor into the audio path of the left sub-mix.

Monitor Out (R&L)

These two XLR connectors provide a balanced signal for the left and right local monitor.

Aux 1-8 Out

These eight XLR connections provide the balanced output sig- nals from their respective auxiliary buses.

Ext. Talkback Out

This XLR connector provides an external balanced signal from the selected talkback source.

Ext. Talkback In

This XLR connector accepts a balanced signal which is assign- able to any of the locations in the talkback system.

Matrix Module Connections

Matrix Out

This XLR connector delivers a balanced signal from the matrix module.

Matrix Insert

This ‘combined send & return’ TRS jack allows for the insertion of an effect or signal processor into the audio path of the matrix output.

Aux In 1

This XLR connector accepts a balanced signal at +4dB level, which can be summed with all the other signals in the matrix output.

Aux In 2