Peavey JSX 212 manual High Gain Input, LOW Gain Input, Channel Select Switch

1918 17 16

2021

(16)TREBLE

This passive control regulates the high frequencies for the Clean channel.

(17)MID

This passive control regulates the mid frequencies for the Clean channel.

(18)BASS

This passive control regulates the low frequencies for the Clean channel.

(19)HIGH GAIN INPUT

Used for most electronic guitars. It is 6 dB louder than the Low Gain input.

(20)LOW GAIN INPUT

Provided for instruments that have extremely high outputs that tend to overdrive (distort) the High Gain input. If both inputs are used simultaneously, the output levels are the same (both are Low Gain).

(21)CHANNEL SELECT SWITCH

This three-position toggle switch allows selection between the amplifier’s three channels. LED (13) illumination indicates which channel is active. Channel switching can also be accomplished by footswitch. See the FOOTSWITCH section of this manual for explanation of switch operation. The CHANNEL SELECT SWITCH must be set in the Ultra position in order for the footswitch to operate properly.

10