master module 5

matrix features

The X-Four includes two MATRIX mixes.Each of these outputs can be made up of signals from the four GROUPS,left,right,mono and an external source.

left, right, and mono levelsMATRIX1–2

These level controls are used to mix the left, right, and mono signals into the corresponding MATRIX.

post-fader—left, right, and mono

These three post-fader switches determine whether the left, right and mono MASTER faders have any effect on signals that available to MATRIX 1–2.

post-left, post-right, post-mono

The left, right and/or mono fader settings have no effect on the LEFT-,

RIGHT- and/or MONO-TO-MATRIX1–2level controls.

The left, right and/or mono faders are introduced into the signal paths.

external input levels—MATRIX1–2

These level controls are used to mix the external MATRIX input signals into the corresponding matrix.The external MATRIX input connectors are located on the rear-panel of the MASTER module.

p. 61

Page 61
Image 61
Peavey X-Four Left, right, and mono levels-MATRIX1-2, Post-left, post-right, post-mono, External input levels-MATRIX1-2