Peak indicator-PK, Left/right assignment-L/R | Peavey X-Four

stereo input module 2

bus assignment features

peak indicator—PK

LED The input signal is monitored at several points throughout the chan- nel.These points are the mic preamp, the EQ stage and the fader stage. Overloads at any of these stages will cause the red peak-LEDto light. Then the channel gain should reduced.

signal level LED’s

LED These three LED's light up at +8—yellow, 0—green, and -6 dB— green. This level range -6 to +8 is the optimum operating range. Compressed or relatively constant signals should remain close to 0.

mono assignment—M

The input signal is assigned to the discrete mono bus. Left and right signals are summed to make up the mono or center signal.

left/right assignment—L/R

The stereo input signals are assigned directly to the main left and right output buses.

The proportion of left vs. right can be adjusted by the BALANCE control.

Best operation occurs when ® the green LED is brightly illuminated and the red LED occasionally flickers.

p. 35

Image 35

Peavey X-Four owner manual Peak indicator-PK, Left/right assignment-L/R

Contents

Four mixing console Manual Table of contents Page Conventions Module Block diagram Panel Line FeaturesPhantom power-+48V Pad Mono input module High-pass filter-HPF Gain Module EQ features 1mono input module Aux stereo 5/6 Aux send featuresAux sends Aux 1-4, 5/6 pre-fader-PRE Panel Mute Bus assignment featuresLeft-center-right-LCR Pan control Mono input module Mono input module Mono input module Signal present indicator-SIG Level meter featuresPeak indicator-PK Signal level LED’s Mono input module Pre-fader listen-PFL Mono assignment-MLeft / right assignment-L-R Group 1-4 assignment 1mono input module Rear panel features Stereo input module Line select-Line Left and right mono-switches Stereo input module Input gain-GAIN Stereo input module Equalizer-EQ on Four-band stereo EQ features Panel Stereo balance 5 and 6-STEREO Aux send 1-6 controls 2stereo input module Balance control 2stereo input module Left/right assignment-L/R 2stereo input module Balance on-groups-BAL on 2stereo input module Line-input left and right 1/4TRS jacks Balanced left and right line-in XLR connectorsLine-input left and right RCA connectors Group module Mid frequency-MID Output eq features Group module Group equalization -per output channel-EQ to Group Group module Post-group Matrix featuresMatrix 1-2 levels-M1, M2 Panel After-fader listen-AFL Fader reverseReversing aux / group and aux / main Aux 1-6 output level Group module Pan Group assignment featuresMono assignment-fromgroup-MONO Left/right assignment-fromgroup-L/R Group module Fader Group/aux level featuresSignal/peak LED’s Panel Group insert return Group outputGroup insert point Group insert send Lamp dim switch and DC in connector Group inputs Auxiliary 1-6 output XLR’sAux insert point Aux insert send Module Block diagram High frequency-HF Master module Left,right,mono equalization-EQ to LEFT,TO RIGHT,TO Mono Module External input levels-MATRIX1-2 Left, right, and mono levels-MATRIX1-2Post-left, post-right, post-mono Panel Matrix 1-2 talkback-TALK to Matrix output featuresMaster output levels-MTX1-2 Master module Sum mono Alternate out featuresPre switch Alternate out level Master module Headphone level Monitor output featuresMonitor-out level Solo-off Four Block Diagram Sum left/right-SUM L/R Left master featuresSignal/peak LED-SIG/PEAK Talkback left/right-TALK to Panel Right master fader Right master featuresLeft/center/right-LCR to Master Four Block Diagram Main left/ main right-L-R to Mono Mono master featuresSolo on indicator Talkback mono-TALK to Mono Panel Talkback on-TALK on Talkback featuresTalkback level Pink noise Module Block diagram Left, right and mono output XLR’s Left and right alternate output XLR’sLeft and right monitor output jacks Matrix 1-2 output XLR’s Module Insert points-left, right, and mono DC power-in Specifications Model 5A power supply Ground linking Power supply usagePower requirements Supply identification Power supply Multiple power supplies in-series Console and power supply groundingRedundant power supplies D7000011 10 /12 /99