Peavey X-Four owner manual Monitor output features, Monitor-out level, Solo-off, Headphone level

master module 5

monitor output features

The MONITOR output section controls the audio feed for the console oper- ator. Features are similar to those of ALT OUT section,except that the MON- ITOR section is normally used to access the SOLO system as well as main outputs.

Like the alternate output section, it provides the ability to assign the left and right MASTER signals to a designated pair of balanced male XLR con- nectors on the rear-panel.

By utilizing the mode switches located below the LOCAL MONITOR OUTPUT level control, these signals can be derived in a number of different ways. In default mode (no switches depressed),the post-fader left and right MASTER signals are routed through LOCAL MONITOR level control and appear at the MONITOR OUT balanced male XLR connectors on the rear-panel.

This feed is replaced by the SOLO signal when a SOLO is activated on the console.

monitor-out level

see—alternate out

sum mono

see—alternate out

solo-off

When any of the AFL/PFL switches on the console are active, the AFL/PFL audio is routed in stereo through the MONITOR OUT level control and appears at the left and right MONITOR OUT balanced male XLR con- nector on the rear-panel.

This setting overrides the left and right feed to the MONITOR output.

When any of the AFL/PFL switches on the console are active, the

MONITOR outputs are not affected.

headphone level

This control governs the level at the headphone jack located in the front of the console under the arm rest.

p. 67