master module 5

talkback features

The TALKBACK system provides facilities for assigning an external signal (usually the console operator's microphone) to any of the console's out- puts.Other signals can be routed through the TALKBACK system include the tone oscillator or the built in PINK NOISE generator.

talkback level

This control sets the level that appears at any of the outputs with their respective TALK TO switches engaged. It also governs the audio level at the TALKBACK output XLR connector on the rear panel.

pink noise

The TALKBACK in-connector is disabled and PINK NOISE is sent though the TALKBACK system.

talkback on—TALK ON

This switch must be activated for the TALKBACK system to operate.

There are two-ways to activate it:

1Momentary - Depressing the button for more-than 1/2 of a second will cause it to act as a momentary switch.When the button is released, the TALKBACK section will be shut-off.

2Toggle - A quick tap on the button (less-than 1/2 second) will cause the switch to electronically change its state from on-to-off or from off-to-on.

p. 75

Page 75
Image 75
Peavey X-Four owner manual Talkback features, Talkback level, Pink noise, Talkback on-TALK on