Balance on-groups-BAL on, Group 1-4 assignment | Peavey X-Four

stereo input module 2

bus assignment features

balance on—groups—BAL ON

The left and right signals are summed as mono to make up the group assignment signals.

The left and right signals are assigned in stereo to the groups in odd/even pairs. GROUP assignment switches 1 and 3 carry the left input-sig- nal and GROUP assignment switches 2 and 4 carry the right input-signal.

The proportion of left vs. right can be adjusted by the BALANCE control.

group 1–4 assignment

The input channel's post-fader signal is assigned to the correspond- ing GROUP bus(es).

see—balanceon—groups

input fader

The input fader is the primary level control for signals being sent to any of the console's mix buses.The only signals not affected are AUX sends select- ed to be pre-fader. The fader offers greater than 80db of attenuation and up to 10db of boost. Normal operation is between -10 and 0.

pre-fader listen—PFL

Pressing this switch will include (illuminated) or exclude (not-illumi- nated) the input channel.

see—master module

p. 37

Image 37

Peavey X-Four owner manual Balance on-groups-BAL on, Group 1-4 assignment

Contents

Four mixing console Manual Table of contents Page Conventions Module Block diagram Panel Phantom power-+48V FeaturesPad Line Mono input module High-pass filter-HPF Gain Module EQ features 1mono input module Aux sends Aux send featuresAux 1-4, 5/6 pre-fader-PRE Aux stereo 5/6 Panel Left-center-right-LCR Bus assignment featuresPan control Mute Mono input module Mono input module Mono input module Peak indicator-PK Level meter featuresSignal level LED’s Signal present indicator-SIG Mono input module Left / right assignment-L-R Mono assignment-MGroup 1-4 assignment Pre-fader listen-PFL 1mono input module Rear panel features Stereo input module Line select-Line Left and right mono-switches Stereo input module Input gain-GAIN Stereo input module Equalizer-EQ on Four-band stereo EQ features Panel Stereo balance 5 and 6-STEREO Aux send 1-6 controls 2stereo input module Balance control 2stereo input module Left/right assignment-L/R 2stereo input module Balance on-groups-BAL on 2stereo input module Line-input left and right RCA connectors Balanced left and right line-in XLR connectorsLine-input left and right 1/4TRS jacks Group module Mid frequency-MID Output eq features Group module Group equalization -per output channel-EQ to Group Group module Matrix 1-2 levels-M1, M2 Matrix featuresPost-group Panel Reversing aux / group and aux / main Fader reverseAux 1-6 output level After-fader listen-AFL Group module Mono assignment-fromgroup-MONO Group assignment featuresLeft/right assignment-fromgroup-L/R Pan Group module Signal/peak LED’s Group/aux level featuresFader Panel Group insert point Group outputGroup insert send Group insert return Lamp dim switch and DC in connector Aux insert point Auxiliary 1-6 output XLR’sAux insert send Group inputs Module Block diagram High frequency-HF Master module Left,right,mono equalization-EQ to LEFT,TO RIGHT,TO Mono Module Post-left, post-right, post-mono Left, right, and mono levels-MATRIX1-2External input levels-MATRIX1-2 Panel Master output levels-MTX1-2 Matrix output featuresMatrix 1-2 talkback-TALK to Master module Pre switch Alternate out featuresAlternate out level Sum mono Master module Monitor-out level Monitor output featuresSolo-off Headphone level Four Block Diagram Signal/peak LED-SIG/PEAK Left master featuresTalkback left/right-TALK to Sum left/right-SUM L/R Panel Left/center/right-LCR to Master Right master featuresRight master fader Four Block Diagram Solo on indicator Mono master featuresTalkback mono-TALK to Mono Main left/ main right-L-R to Mono Panel Talkback level Talkback featuresPink noise Talkback on-TALK on Module Block diagram Left and right monitor output jacks Left and right alternate output XLR’sMatrix 1-2 output XLR’s Left, right and mono output XLR’s Module Insert points-left, right, and mono DC power-in Specifications Model 5A power supply Power requirements Power supply usageSupply identification Ground linking Power supply Redundant power supplies Console and power supply groundingMultiple power supplies in-series D7000011 10 /12 /99