Peavey X-Four owner manual Aux send 1-6 controls, Stereo balance 5 and 6-STEREO

stereo input module 2

aux send features

The following descriptions apply to the stereo line input module when configured for stereo operation.

see—mono input module for mono operation

aux send 1–6 controls

These knobs adjust the amount of signal sent the AUX buses. AUX 1–4 are fed from a summed-mono source. AUXES 5–6 are also fed from this mono source, but can be switched to stereo operation.

see—stereo balance

aux 1-4, 5/6 pre-fader—PRE

The default signal source for the AUX SENDS is post-fader.These switches select a pre-fader source for their respective auxes.The pre-fader signal is derived post-mute and post-eq.

see—internal jumper options

Corresponding AUX SENDS are post-eq, post-mute and post-fader.

Corresponding AUX SENDS are post-eq, post-mute and pre-fader.

stereo balance 5 and 6—STEREO

AUX 5 and 6 are mono.

AUX 5 acts as a left and right level-control and AUX 6 acts as a left/right balance-control.

p. 31