Pelco C2406M-F (4/04) manual Important Safeguards And Warnings

IMPORTANT SAFEGUARDS AND WARNINGS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not block any ventilation openings. Install in accordance with the manufacturerÕs instructions.

6.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

7.Only use attachments/accessories specified by the manufacturer.

8.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

9.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

10.To reduce the risk of shock do not perform any servicing other that that contained on the operating instructions unless you are qualified to do so.

11.Installation should be done only by qualified personnel and conform to all local codes.

12.Unless the unit meets NEMA Type 3, 3R, 3S, 4, 4X, 6 or 6P standards, it is designed for indoor use only and must not be installed where exposed to rain and moisture.

13.Use only installation methods and materials capable of supporting four times the maximum specified load.

14.Use stainless steel hardware to fasten the enclosure to outdoor surfaces.

15.To prevent water leakage when installing an enclosure outdoors, apply sealant around the bolt holes between the enclosure and mounting surface. Use a non-acetic, acid-based sealant only.

2 C2406M-F (4/04)