Pelco C2407M-G (5/03) Regulatory Notices

Pelco Manual C2407M-G (5/03) [ 11 ]

Regulatory Notices

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-

struction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to cor-

rect the interference at his own expense.

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However there is no guarantee that the interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try and correct the interfer-

ence by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

REVISION HISTORY

Manual # Date Comments

C2407M 11/99 Original version.

C2407M 1/00 Revised installation instructions. Added FCC notices.

C2407M-A 1/00 Added varifocal lens. Changed format.

C2407M-B 7/00 Added information on dome liner.

C2407M-C 1/01 Added information on conduit set screw and heater element caution.

C2407M-D 7/01 Camera module redesigned, reference ECO 01-7054/7055/7056.

C2407M-E 12/01 Manual revised to reflect product design revision.

C2407M-F 7/02 Added instructions for fixed lens with auto iris.

C2407M-G 5/03 Revised installation instructions – bracket and camera assembled at factory. Added iris

level adjustment for fixed lens with auto iris.