Pelco C3407M-D manual Back Box Connectors, Heater Board Servicecameraconnector, Connectorconnector

Models: C3407M-D

1 24

Page 11

2.Unplug the camera (10-pin), heater board (four-pin), and service (three-pin) connectors from the back box (refer to Figure 6).

SERVICECAMERACONNECTOR

C3407M-D (1/07)

Image 11

Contents

I N S T A L L A T I O N C3407M-D1/07Integrated Camera System Wide Dynamic Range WDR ICS150-CWSeries CamclosurePage Contents List of IllustrationsRADIO AND TELEVISION INTERFERENCE Regulatory NoticesMODELS DescriptionFigure 1. Package Components SHOWN ACTUAL SIZEFIXED CEILING/WALL Cover and Back Box InstallationUNSHIELDED TWISTED PAIR UTP VIDEO SUSPENDED CEILING 4S DEEP ELECTRICAL BOX MODULE REMOVAL Camera ModuleC3407M-D1/07 Figure 6. Back Box ConnectorsHEATER BOARD SERVICECAMERACONNECTOR CONNECTORCONNECTORCAMERA ORIENTATION MODULE INSTALLATIONVARIFOCAL LENS ZOOM AND FOCUS ADJUSTMENTS Camera AdjustmentsSWITCH SETTINGS ADJUSTING THE VERTICAL PHASE VERTICAL PHASE ADJUSTMENT 24 VAC OPERATION ONLYC3407M-D1/07 Camera PositioningTilt Figure 11. Positioning the CameraInstall Dome and Trim Ring Service Connector 12.5 mm monaural headphone plug LENS SpeciﬁcationsCAMERA General BACKBOXElectrical C3407M-D1/07 RETURNS PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTY REVISION HISTORYTel 1-559/292-1981 Fax 1-559/348-1120 Worldwide Headquarters 3500 Pelco WayClovis, California 93612 USA USA & Canada Tel 800/289-9100 Fax 800/289-9150 International