Indicators and Connections
FRONT PANEL
The front panel of the RCS Series rack mount power supply contains the following indicators and mounting holes.
Figure 2. Front Panel (circuit breaker model shown)
ìMounting Holes: Front rack mounting holes are located at each of the four corners.
îPower: Indicates that the unit has power. To receive power, the unit must be plugged into a power source.
NOTE: When the optional locking face plate is installed, the Pelco badge glows blue when the unit has power.
ïFuse or Breaker Status: Indicates that power is flowing to the connected device. When not lit, power is not flowing to the connected device.
ñCircuit Breakers or Fuses: A separate self-setting circuit breaker or replaceable fuse is available for each device that is attached to the power supply. To replace a fuse, refer to Circuit Breakers and Fuses on page 16.
NOTE: The additional holes on the front panel are used for the optional locking face plate.
9 |
