6 C613M-A (5/05)
PRODUCT SERIAL NUMBER LABEL PLACEMENT Product serial number labels help Pelco’s Product Support identify your system and its factory configuration in case the SP04-140 or its
components require service.
A label citing your product’s serial number is attached to the bottom panel of the SP04-140. Because rack mounting or other installation options
may obscure the factory-applied label, two additional labels are provided. Attach one of them to your product documentation or another product
location that will not be obscured by installation. The second label is a spare.
To use these labels:
1. On the bottom panel of your SP04-140, locate two small labels, attached with a yellow sticker that reads, “Extra serial number labels:
remove prior to installation.”
2. Remove the yellow sticker and the labels.
3. Peel away the backing from one label and attach it to this installation manual, other product documentation, or an unobscured product
location.
Figure 1.
Product Serial Number Label