22 C613M-A (5/05)
CONFIGURATION/RESET BUTTON
Use the recessed configuration/reset button at the top of the front panel to access the following modes:
Table F. Configuration/Reset Button Functions and Indicators
To access one of these modes:
1. Use a probe or paper clip to press and hold the configuration/reset button . The unit starts cycling through the four modes
(configuration, reboot, reset, and cancel), holding each mode for five seconds. The unit status indicator flashes the color for the current
mode.
2. When the color of the desired mode appears, release the button.
NOTE: If there is no configuration activity for 15 minutes, the SP04-140 automatically exits configuration/reset mode.
Mode Function Unit Status Indicator Light
Configuration Initiates system configuration. • Flashing amber when entering this mode
• Solid amber when selected
Reboot Restarts the unit. • Flashing green when entering this mode
• Flashing green when selected and during restart
Reset Resets unit to factory default settings and then
restarts unit.
• Flashing red when entering this mode
• Flashing red when selected, then flashing green during
restart
Cancel Cancels any configuration or reset action. • No light