C613M-A (5/05) 21
Operation
Refer to the WS5000 operation manual for details on how to access and configure the SP04-140 video encoder.
FRONT PANEL INDICATORS
Figure 20.
SP04-140 Front Panel
Pelco badge (power)
The Pelco badge glows blue when the unit has power.
Unit status
Unit status is indicated by one of the following three colors:
Green
The unit is functioning normally.
Amber
The unit is in configuration mode.
Red
The unit is in an error condition.
Whenever the unit status indicator is flashing, the unit is in one of three system modes (refer to
Configuration/Reset Button
).
Network status
Network status (connection and speed) is indicated by one of the following conditions:
Off
The unit is not connected to the network.
Solid Amber
The unit is connected to the network using the 100BaseT standard.
Solid Red
The unit is connected to the network using the 10BaseT standard.
NOTE:
For optimum performance, Pelco recommends using the 100 BaseT standard.
Network activity
The network activity indicator flashes whenever the video encoder is sending or receiving network data.
Video presence
Video presence is indicated by one of the following conditions:
Green
Camera video is present at the video in (2) connector, or both video in connectors.
Red Camera video is present at the video in (1) connector. The indicator is also red if there is no video to both video connectors.
NETWORK CONNECTOR UNIT STATUS
NETWORK STATUS
NETWORK ACTIVITY
CONFIGURATION/
RESET BUTTON
VIDEO
PRESENCE