4.4 LOGGING OFF
To log off, select 
from the default menu, which can be reached by pressing
. This will result in the prompt Are you sure you want to log off? Select
to log off, or select 
to remain logged on.
Alternatively, select monitor 0 to log OFF from any menu level without the
4.5SELECTING MONITORS
1.Using the keypad, enter a monitor number, and then press 
or,
select |
|
| from the default menu. |
|
| ||
|
|
|
|
2.Cycle through the available monitor sequence using 
and 
.
If a user definable control key has been assigned the enter function, monitors can be selected as follows:
1.Press 
.
2.Enter a monitor number.
3.Press the user definable control key that has been assigned the enter func- tion - this can be located by referring to the decal.
4.6SELECTING CAMERAS
1.If necessary, select 
from the default menu, to reach the camera sub- menu.
2.Cycle through available cameras using 
and 
or,
using the numeric keypad, enter a camera number and press 
.
If a user definable control key has been assigned the enter function, cameras can be selected as follows:
1.Press 
.
2.Enter a camera number.
3.Press the user definable control key that has been assigned the enter func- tion - this can be located by referring to the decal.
and 
can also be used to cycle through cameras.
Pelco Manual C540M (6/98) | 19 |
