Pelco CM9760-KBR 5.0ADVANCED OPERATION, 5.1PRESET CAMERA POSITIONS, 5.1.1Recalling Presets

5.0ADVANCED OPERATION

5.1PRESET CAMERA POSITIONS

NOTE: Presets are only possible when receiver/drivers, zoom lenses and/or pan/tilt heads are fitted with preset facilities.

A preset camera position is a set of parameters which define pan, tilt, zoom and focus adjustments. A preset camera position can be recalled as follows:

1.Manually, using the CM9760 keyboard

2.Automatically as the result of an alarm condition (refer to the 9760 alarm file)

3.From a macro command

5.1.1Recalling Presets

1.Using the keypad, enter the preset number.

2.Select or press .

5.1.2Creating Presets

NOTE: Your define PIN need only be entered once during operation. The default PIN is 1234. To alter the define PIN, see Section 3.0, Installa- tion and Setup.

1.Display the define sub-menu by selecting from the default menu.

2.Enter your four-digit define PIN.

3.Using the joystick and camera control keys, set up the camera preset re- quired.

4.Using the keypad, enter a preset number between 1 and 99.

5.Select .

6.Select to revert to the default menu.

5.1.3Deleting Presets

1.Display the preset sub-menu by selecting on the default menu, or by

pressing .

2.Using the numeric keypad, enter the number of the preset that you wish to delete.

3.To delete the preset, select .

4.Select to revert to the default menu.

22 Pelco Manual C540M (6/98)