Pelco dx8100 manual Understanding the Setup Dialog BOX, Button

UNDERSTANDING THE SETUP DIALOG BOX

The Setup dialog box opens in the DX8100 view panel to the default Camera page. Excluding the video visible through the Camera page Motion Zone window, you cannot see video from any of the other setup pages. You must exit the Setup dialog box to access the DX8100 functions in the main window.

The following figure shows the parts of the Setup dialog box.

￿

￿

￿

￿

￿

￿

￿

￿

￿

￿￿

Figure 85. Parts of the DX8100 Setup Dialog Box

The following table describes the parts of the Setup dialog box.

			Table AC. Parts of the DX8100 Setup Dialog Box
Item	Button	Part	Description
		Camera	Click the Camera icon to configure cameras. Available options are PTZ functions, motion detection,
			picture adjustment, audio, and video loss detection settings.
		Linking	Click the Linking icon to configure relays and alarms, associate relays and alarms with cameras, link
			relays to alarms, and link cameras to other cameras.
		Schedule	Click the Schedule icon to build custom recording schedules, set image resolution, frame rate, and
			image quality, and configure relay settings.
		Network	Click the Network icon to set up the network configuration and communication port settings.
		Backup	Click the Backup icon to configure and perform backups.
		User	Click the User icon to add, delete, or change user accounts.
		Site	Click the Site Setup icon to add, delete, and configure additional DX8100 Series DVRs.
		System	Click the System icon to set up additional system options.
		Ext. Monitor	Click the Ext. Monitor icon to configure an additional display monitor. (This icon appears only if the
			optional display card has been installed.)

Notification

Click the Notification icon to configure emergency agent and e-mail notification options.

110 C2630M-B (4/08)