Pelco dx8100 manual Frame Rate Configuration Dialog Box

To set the frame rate values for cameras:

1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.

2. In the Setup dialog box, click . The Schedule page is displayed.

3.In the Camera Settings section, click Frame Rate Configuration. The Frame Rate Configuration dialog box opens.

4.Select the button for the recording mode you want to configure. Options are as follows:

•604

•704

•Normal

•Motion

•Alarm

•ATM/POS

5.Do the following:

a.Using the ALL frame rate settings slider, set the frame rate for all channels.

b.To set the frame rate for an individual channel, use the frame rate slider for that channel to select a frame rate from 1-30 ips (according to the available capacity for the channel). The frame rate of an individual channel is limited to the maximum setting of the ALL frame rate slider.

The frame rate ranges from 1-30 ips, depending on the DX8100 Series DVR configuration. The 8-camera DVR has 8 sliders, the 16-camera DVR has 16 sliders, the 24-camera DVR has 24 sliders, and the 32-camera DVR has 32 sliders.

6.Repeat step 5b for each camera you want to configure.

7.Click OK.

8.Click Apply at the Schedule page.

￿

￿

Figure 121. Frame Rate Configuration Dialog Box

C2630M-B (4/08) 141