Install the DX8UP-512MBRAM Memory Module
This section describes how to install the
1.Upgrading the DX8000 memory from 256 MB to 768 MB: In this case, the 256 MB RAM DIMM module is installed in DIMM1. For information about installing the
2.Upgrading the DX8000 memory to 768 MB and maintaining the
•One 256 MB module is in DIMM1. This module provides 256 MB of memory for the DX8000
•The second 256 MB module is in DIMM2. This module supports the
In summary, the procedure for installing the
a.Remove the 256 MB DIMM module installed in DIMM1 and install it in DIMM3.
b.Install the
The memory installation procedure below provides specific instructions for scenario 1 and general instructions for scenario 2. However for scenario 2, you can refer to the installation procedure below for instructions about how to remove and install a DIMM module.
To install the
1.Carefully remove the
2.Remove the current 256 MB DIMM module from slot DIMM 1. Refer to Figure 7.
CURRENT 256 MB DIMM
DIMM 1
DIMM 2
DIMM 3
Figure 7. Current 256 MB DIMM Module In DIMM 1
3.To re-install the current 256 MB DIMM module, do the following:
a.Align the current 256 MB DIMM module (removed from slot DIMM 1) with the socket for slot DIMM 2 so that the notch in the module lines up properly with the break in the DIMM socket. Refer to Figure 8.
b.Make sure that the white retaining clips are not in the locked position by pressing outward and down on each clip.
6 |
