REAR PANEL - FR85041 RECEIVER
Figure 5 illustrates the rear panel of the FR85041 receiver.
1
2
3
7
8 GND
Figure 5. Rear Panel of FR85041 Receiver
RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of rack- mounted module
STAND-ALONE POWER CONNECTOR, 2-pin connector for power connection of stand-alone module; removable mating connector with screw terminals (not shown)
VIDEO OUT CONNECTORS 1-4, 75-ohm BNC analog video output
FIBER OPTIC CONNECTOR, ST or FC (dependent on FR85041 model)
DATA CONNECTOR, 9-pin connector; removable mating connector with screw terminals (not shown)
DATA SELECTION SWITCH, 10-position rotary switch (positions 0-9)
For additional information about rear-panel connections and about the Data Selection switch, refer to the Installation section.