Pelco FR85041 installation manual Connections

CONNECTIONS

Connections to the FT85041 transmitter and the FR85041 receiver are made on the rear panel of the modules and consist of the following:

•Power connection

NOTES:

–A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module. A 12 VDC power supply is provided. If a 24 VAC power supply is used, the power supply must be a Listed Direct Plug-In Power Unit marked as Class 2 and rated as 24 VAC, 400 mA (minimum output).

–In extreme temperature conditions, it is recommended that an industrial-rated outdoor power supply such as the Pelco WCS1-4 power supply be used.

•Video input connections (transmitter only)

•Video output connections (receiver only)

•Fiber connection

•Data connection

Figure 8 provides an illustration of FT85041 transmitter/FR85041 receiver connections.

POWER/ALARM CONNECTION FOR RACK-MOUNTED MODULE

POWER CONNECTION FOR STAND-ALONE MODULE

COAXIAL

CABLE

COAXIAL

CABLE

COAXIAL

CABLE

COAXIAL

CABLE

1

2

3

4

5

6

7

8

GND

1 2		3	4
0			5
9	8	7	6

FIBER OPTIC CABLE

DATA COMMUNICATION CABLE (REFER TO TABLE B FOR DATA CONNECTOR PIN ASSIGNMENTS AND TO FIGURES 9-14 FOR WIRING DIAGRAMS)

Figure 8. FT85041 Transmitter/FR85041 Receiver Connections

18 C1645M-A (9/06)