Pelco FR85041 installation manual Specifications, Video, Data, General, Mechanical

Specifications

VIDEO
Number of Channels	4
Modulation Type	Pulse code modulation, 8-bit resolution
Video Input (FT85041)/	1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Video Output (FR85041)
Bandwidth	6.5 MHz
Gain	Unity
Crosstalk	-50 dB typical at 3.58 MHz
Differential Gain	<1%
Differential Phase	<1.2°
Tilt	<1%
Signal-to-Noise Ratio	>60 dB (CCIR weighted)
DATA
Number of Channels	1
Data Communication	RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase
Maximum Baud Rate	500 kbps
GENERAL
Operating Temperature	-40° to 167°F (-40° to 75°C)
Input Power Requirements	12 VDC or 24 VAC, 400 mA
LED Indicators	Power
	Video Present (per channel)
	Optic Fault - Optical Signal Status
	Optic Fault - Laser Status
	Data Tx
	Data Rx
Dimensions	8.75” D x 2.28” W x 4.81” H
	22.23 x 5.79 x 12.22 cm
Unit Weight	2.54 lb (1.58 kg)
MECHANICAL
Connectors
Video	BNC (per channel)
Rack Power/Alarm	4-pin connector
Stand-Alone Power	2-pin connector, screw terminal
Data	9-pin connector, screw terminal
Fiber Optic	ST for multimode fiber
	ST or FC for single-mode fiber

C1645M-A (9/06) 29