C2926M-D (9/09) 17
Not all menus are available for both RGB and DVI. Menus that are unavailable do not appear dimmed, while some menus t hat do not apply are
not shown.
The RGB and DVI mode menu contains the following features:
Input: Changes the video input option. Select RGB or DVI.
Contrast: Adjusts the black level of the image (0 to 100).
Brightness: Adjusts the white level of the image (0 to 100).
H-Position: (RGB only; dimmed in DVI mode.) Adjusts the horizontal position (0 to 100).
V-Position: (RGB only; dimmed in DVI mode.) Adjusts the vertical position (0 to 100).
Frequency: (RGB only; dimmed in DVI mode.) Adjusts the horizontal size of the screen image (0 to 100).
Phase: (RGB only; dimmed in DVI mode.) Adjusts image distortion appearing as horizontal noise on the screen (0 to 100).
Auto Position Override: Changes the display resolution. Select DISABLE, 1024 x 768, 1280 x 768, 1360 x 768, or 1366 x 768.
• This menu is enabled only when one of the listed resolution settings is selected.
• If an input signal causes problems on the screen, select a different setting.
• The Auto Position menu has no effect on resolution inputs that are not listed.
Language: Changes the language selection. Select English, Italian, French, Spanish, German, Portuguese-Brazilian, Russian, or Chines e for the
OSD display.
OSD Setting: Select SETUP for the on-screen display. Then select one of the following:
•OSD H.POSITION: Adjusts the OSD horizontal position (0 to 100).
•OSD V.POSITION: Adjusts the OSD vertical position (0 to 100).
•OSD DISPLAY TIME: Adjusts the display time (OFF or 5 to 30 seconds). Selecting 5 or 30 determines how many seconds the display
remains on the screen after you press a button. Selecting OFF means that there is no delay.
Color Temperature: Select NORMAL, COOL, or USER. If you select USER, then select from the following:
•R-Gain: Adjusts gain for red (0 to 100).
•G-Gain: Adjusts gain for green (0 to 100).
•B-Gain: Adjusts gain for blue (0 to 100).
•Reset: Select RESTORE to return to the original color temperature settings.
ISM: (Image sticking minimization) Sets the recovery time of an LCD panel display when screen burn-in occurs (when a fixed image has been
displayed for a long time). The ISM function starts working after the power is off for 10 minutes. Select ON, OF F, or from 1 to 8 hours for the
operation period.
Default Setting: Select RESTORE to reset the monitor to the default settings.
Information: Select INFORMATION to access Pelco headquarters information.