Pentair Intellitouch ScreenLogic manual IntelliTouch Circuit Functions

39

IntelliTouch Circuit Functions

The following Circuit Functions allow you to assign special logic to the circuits.

Note: To ensure proper operation, some circuits shown below will only display on certain screens. For example, SAm and SAL Lights will always display on the Lights screen, not on the Main screen.

Generic	A circuit with no special logic. Simple On/Off control of a circuit with all the
	programmable capabilities.
Master cleaner	Works with automatic pool cleaner pumps or cleaner valve actuator. It does the
	following:
	- Forces the filter pump on 5 minutes before the cleaner starts.
	- Turns the cleaner off when the spa is on.
	- Turns the cleaner off for 5 minutes when the solar heating begins.
Light	Allows special lighting features to work, such as lights All Off and All on.
Dimmer	Allows light dimming features to work. Dimming relay must be installed (P/N 520406).
SAM Light	Activates special color lighting features on the Configure Colors lights screen (see
	page 64) when used with SAM pool lights. The SAM light must be assigned in the
	Special Lights dialog to use the All Off, All On, Color Set, Color Sync, and Color Swim
	lighting features.
SAL Light	Activates special color lighting features on the Configure Colors lights screen (see
	page 62) when used with SAL spa lights. The SAL light must be assigned in the
	Special Lights dialog to use the All Off, All On, Color Set, Color Sync, and Color Swim
	lighting features.
Photon Generator	Lets Pentair Fiberworks fiber optic bulb be operated by Color Set or Color Swim
	programs when used with SAM and SAL lighting. This light must be assigned in the
	Special Lights dialog to use the All Off, All On, Color Set, Color Sync, and Color Swim
	lighting features.
Color Wheel	Activates special color lighting features on the Configure Colors lights screenn (see
	page 62) when used with Pentair Fiberworks. The Color Wheel light must be assigned
	in the Special Lights dialog to use the All Off, All On, Color Set, Color Sync, and Color
	Swim lighting features.
Spillway	For pool/spa combinations where the spa is raised above the pool. This setting moves
	the return valve so that the filter pump pulls the water from the pool and returns it to
	the spa, creating a water fall effect. Automatic pool cleaners are turned off when this
	feature is turned on.
Floor Cleaner	This setting moves a 3-way valve every 20 minutes alternating flow between 2 cleaner
	system valves that feed the pop-up heads.
IntelliBrite	Activates an IntelliBrite LED light.

IntelliTouch ScreenLogic User’s Guide