62
IntelliTouch ScreenLogic User’s Guide
Dim Lights
Lights that have dimming functionality can be dimmed from the Lights screen. Only incandescent tungsten filament
lights may be dimmed. SAm, SAL, IntelliBrite, Fiber-optic, or Halogen lights cannot be dimmed. The feature circuit
must be assigned a dimmer circuit function. To assign a circuit function, see “Assign a Circuit Name and Function,“
page 38. In order to dim lights, the Dimmer Module (P/N 520406) must be installed by a qualified electrician in the
Load Center.
To dim lights:
1. From the Main screen, tap the Lights tab.
2. Tap one of the Dimmer buttons to set the dimming level for the light. Dimmer percent values are from 30% to
100%. The light will adjust to the set dimming level.
Note: Macros can turn on light dimming circuits, but lights cannot be dimmed through the macro.
The dimming level must be changed for each light dimming circuit.
emaNnoitpircseD
snottuBsthgiLlaicepS otsnottubsthgiLlaicepSehtrofdna,neercssihtniyalpsidotsthgilroF
eromr
oF.golaidsthgiLlaicepSehtnithgilehtngissatsriftsumuoy,krow
.53egap,)5fo2petS(stiucriCputeSotrefer,noit
amrofni
:ffOllA laicepSehtnidengissaneebevahtahtsthgilllaffosehctiwS
.)53egapees(ytiliturotarugifnoCehtf
o2petsnigolaidsthgiL
:nOllA laicepSehtnidengissaneebevahtahtsthgilllaffosehctiwS
.golaidsthgiL
:teSroloC evahtahtsthgilskrowREBIFdna,LAS,MASllanosehctiwS
.golaidsthgiLlaicepSehtnidengissaneeb
:cnySroloC dna,LAS,MASllaroferutaefcnySroloCehtsetavitcA
.golaiDsthgiLlaicepSehtnidengissaneebevahtahtsthgilskrowrebiF
:miwSroloC dna,LAS,MASllaroferutaefmiwSroloCehtsetavitcA
.golaidsthgiLlaicepSehtnidengissaneebevahtahtsthgilskrowrebiF
:raBsutatSedoMroloC dnasutatsnoitavitcaehtsetacidnirabderehT
roloCro,cnySroloC,teSroloCehtgnitavitcA.emitnoitelpmoctnerruc
ehtrofetunimenootpuekatnacti,etaidemmitonsiserutaefmiwS
.etelpmocotssecorp
Lights Screen (Continued)