Pentair Intellitouch ScreenLogic Special Lights Button, Feature Circuit Configuration Button

36

Setup Circuits (Step 2 of 5) Continued

Special Lights Button

Use this button to display the “Special Lights” dialog. Lights displayed in this dialog are circuits that are assigned as “Lights.”All Lights assigned in this dialog will be controlled by theAll Off,All On, Color Set, Color Sync, and Color Swim buttons on the Lights screen. Up to 12 SAm, SAL, lights and the Color Wheel can be configured to use the Color Set, Color Sync, and Color Swim lighting features.

Feature Circuit Configuration Button

The Feature Circuit Configuration button is enabled after you select a Feature Circuit (1 - 10) from the main list of circuits, assign a circuit name and circuit function. Use this button to access the “Configure” dialog. The selected Feature Circuit will be the name of the macro (i.e. Fountain). To access the Feature Circuits, scroll down to the end of the availableAUX circuits, select the name of the Feature Circuit. There are 10 available Feature Circuit names that can be assigned multiple functions in the Configure Macro dialog.You can also assign a custom name to the circuit (see page 42).

Name	Description
Circuit	Displays the available circuits that can be used as a macro circuit.
	This button is enabled when a Feature Circuit is selected from the
	list of circuits.
On/Off Ignore	Select On to activate a selected Macro circuit. To switch a Macro
	off, select Off. Select Ignore, to not use the selected Macro.
Done button	Save setting and close dialog.

IntelliTouch ScreenLogic User’s Guide