Pentair Intellitouch ScreenLogic manual Change the Pool and Spa Temperature, Main Lights Screen

60

Change the Pool and Spa Temperature

All pool and spa heat modes and temperature controls are located on the Main screen. The pool or spa will heat to the settings specified on this screen.

Changing Pool Heat Settings

To raise the pool water temperature:

1.From the main screen choose Heater, Solar Preferred or Solar in the Heat Mode selection.

2.Tap the pool Warmer button. The pool will heat to the settings specified as indicated by the Set Point. To lower the pool water temperature:

• Tap the Off button for Heat Mode or tap the Cooler button to change the new Set Point temperature.

Changing Spa Heat Settings

To raise the Spa water temperature:

1.From the main screen choose Heater, Solar Preferred or Solar in the Spa Heat Mode selection.

2.Tap the spa Warmer button. The pool will heat to the settings specified as indicated by the Set Point. To lower the spa water temperature:

• Tap the Off button for Heat Mode or tap the Cooler button to change the new Set Point temperature.

Main Lights Screen

From the COLOR LIGHTS and INTELLIBRITE tabs you can control standard pool and landscape lights and IntelliBrite LED lights which are displayed on the main Lights screen. For lights to display on the main lights screen, circuits must first be assigned as “lights” in the “Setup Circuits (Step 2 of 5)” page of the Configurator utility (see page 35).

A combination of standard and IntelliBrite pool and spa lights can be controlled from both the “Color Lights” and “IntelliBrite” tabs. For example, you might have two Pentair SAm lights, two IntelliBrite LED lights in your pool/spa. These lights can be controlled from the Lights screen using the special Color Set, Color Swim and Color Sync lighting features in the “Color Lights” tab or control the IntelliBrite lights from the “IntelliBrite” tab to select fixed colors or a color show mode.

IntelliTouch ScreenLogic User’s Guide