Pentax 12622, 12633 change, D/E/F/G, 6 Press the 4button, 4 Use the four-waycontroller (23), to choose a parameter you want to

4 Use the four-way controller (23)	Capture Settings
to choose a parameter you want to
change.
You can select a different image by turning
the e-dial.	OK
The following parameters can be changed.

Parameter	Value	Page
Aspect Ratio	D/E/F/G	p.98
JPEG Recorded Pixels	JPEG recorded pixels corresponding to	p.99
	the aspect ratio
JPEG Quality	Fine/Normal	p.100
Custom Image	Bright/Natural/Vibrant/Reversal Film/	p.110
	Monochrome
White Balance	F/G/H/^/JD/JN/JW/JL/	p.100
	I/L/K
Sensitivity	-1.0 to +1.0	—
Shadow Correction	On/Off	p.104
Distortion Corr.	On/Off	p.106

5 Use the four-way controller (45) to change the value.

Press the four-way controller (5) to display the setting screen for White Balance and Custom Image.

6 Press the 4button.

The save confirmation screen appears.

7 Use the four-way controller (23) to select [Save as], and press the 4button.

The RAW image is developed and saved as a new image.

8 Use the four-way controller (23) to select [Continue] or [Exit], and press the 4button.

Select [Continue] to edit other images. The screen for selecting the parameter in Step 4 appears again.

4 Editingand

Images Printing

159