Pentax 12622, 12633 Displaying the Clock Display, Resetting to Default Settings (Reset), 1 Press and hold down the 4 button

5 Settings

3 Use the four-way controller (45) to switch between O and P.

OThe Startup Shortcut is available.

PThe Startup Shortcut is not available.

The default settings are all O.

Displaying the Clock Display

You can use the camera as a clock. With the camera turned off, press and hold down the 4button to display the clock on the display.

1 Press and hold down the 4 button.

The camera turns on and the clock appears

on the screen.

The camera turns off automatically after approximately 10 seconds.

Pressing the power button turns the camera off immediately.

To disable the clock display by pressing 4button, set [Clock Display] to P (Off) on [Startup Shortcut] in the [WSetting 4] menu. (p.191)

Resetting to Default Settings (Reset)

You can reset the camera settings to their defaults. Refer to “Default Settings” (p.216) for the reset settings.

1 Use the four-way controller (23) to select [Reset] in the [WSetting 3] menu, and press the four-way controller (5).

The [Reset] screen appears.

192